Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
VOLTAGE READING IN THE E120
03-03-17, 11:00 PM
Post: #1
VOLTAGE READING IN THE E120
HELLO
I AM TRYING TO GET IN MY E120 TO READ VOLTAGE
I HAVE DONE THAT BEFORE AND FOR SOME REASON FORGOT HOW TO ACCESS
I GUESS I AM GETTING OLD
MY BEST
Find all posts by this user
Quote this message in a reply
03-06-17, 04:49 PM
Post: #2
RE: VOLTAGE READING IN THE E120
Welcome to the Raymarine Forum ynot,

Unless interfaced to a NMEA 2000 battery voltage monitor, the MFD would be incapable of populating the Databar or Data application with Battery Voltage. However, a reasonably accurate reporting of battery voltage may be obtained within the MFD's diagnostics (MENU->SYSTEM DIAGNOSTICS->INTERNAL INTERFACES->CCFL->POWER MONITOR).
Visit this user's website Find all posts by this user
Quote this message in a reply
03-06-17, 11:20 PM (This post was last modified: 03-07-17 10:44 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: VOLTAGE READING IN THE E120
thank you very much Sir
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us