Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CP 200 not on device list.
03-08-17, 08:13 PM
Post: #1
CP 200 not on device list.
Sorry its another cp 200 question. I got everything hooked up and took the boat out and it works awesome, I love it. Now on to the question,
when I go into maintenance>Diagnostics>Select Device my cp 200 does not show on the list. It appears to work fine but I was curious if this was normal since it is a networked device.
Find all posts by this user
Quote this message in a reply
03-09-17, 04:10 PM
Post: #2
RE: CP 200 not on device list.
Welcome to the Raymarine Forum riverrat42701,

I'm at a bit of a loss to explain why the CP200 is not listed within the MFDs Select Device List (HOME->SET-UP->MAINTENANCE->DIAGNOSTICS->SELECT DEVICE). Should your MFD not already have been updated with v17.46 software, then it is recommended that it be updated accordingly as a possible solution to the reported issue.
Visit this user's website Find all posts by this user
Quote this message in a reply
03-09-17, 07:32 PM (This post was last modified: 03-10-17 09:04 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: CP 200 not on device list.
Chuck, yes I put the latest update on it as soon as I installed, I have a raynet cable run from the 200 box to my es98. The only thing that shows up is my a65 on and the es98. At this point I believe the sounder to be working properly though.
Find all posts by this user
Quote this message in a reply
03-10-17, 09:08 AM
Post: #4
RE: CP 200 not on device list.
riverrat42701,

Once again, I'm at a loss to explain your findings. However as the system is functioning properly in all other respects related SideVision, I wouldn't be overly concerned. You may want to consider sending your CP200 to Raymarine’s Product Repair Center to be bench checked / serviced your boating season ends or when when it is convenient to do so ... while the CP200 is still covered by warranty.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us