Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E120 classic
03-20-17, 02:08 PM
Post: #1
E120 classic
chuck , I have a e120 classic that has a radar , and a airmar gps/high speed sensor connected through the seatalk2 outlet . can a dsm 300 be connected at the seatalk highspeed outlet using a crossover coupler ? if so can I connect another e120 through the seatalk/alarm out at a later date . if this is not possible what is the best way to do so . thanks , jim
Find all posts by this user
Quote this message in a reply
03-20-17, 02:26 PM (This post was last modified: 03-20-17 02:28 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: E120 classic
Welcome to the Raymarine Forum Jim,

Q1. can a dsm 300 be connected at the seatalk highspeed outlet using a crossover coupler ? if so can I connect another e120 through the seatalk/alarm out at a later date . if this is not possible what is the best way to do so?
A1. The DSM30/300 and E-Series Classic MFDs each feature Ethernet (SeaTalkhs) network communications interaces. Indeed, the DSM30/300 is designed to be interfaced to an E-Series Classic MFD via a pair of SeaTalkhs (M) to RJ45(M) Cables which have been joined to one another using a SeaTalkhs Crossover Coupler. Alternatively, the E-Series Classic MFD(s) and DSM30/300 may each be interfaced to a HS5 RayNet Network Switch via a cable assembly constructed from an A80272 SeaTalkhs (M) to RayNet (M) Adapter and an appropriate length of RayNet (F) to RayNet (F) Cable.
Visit this user's website Find all posts by this user
Quote this message in a reply
03-20-17, 07:15 PM
Post: #3
RE: E120 classic
thanks for the info Chuck and fast reply . Jim
Find all posts by this user
Quote this message in a reply
03-21-17, 08:22 AM
Post: #4
RE: E120 classic
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us