Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CP570
04-05-17, 12:56 PM
Post: #1
CP570
In MFD manual is stated:

"The CP570 sonar module features 2 CHIRP sonar channels that can transmit and receive independently of each other. Ping modes are available that balance the ping rate Vs interference between the 2 channels."

Is this means that running the B175H and B175HW simultaneously is possible without interference's?

Is it combination of B175H and B175HW connected on CP570 recognised as a 2 channel transducer?

"Note: Ping modes will only be available when the sonar module is connected to a 2 channel transducer."
Find all posts by this user
Quote this message in a reply
04-06-17, 03:40 PM
Post: #2
RE: CP570
Welcome to the Raymarine Forum mburazor,

Unfortunately, the CP570 may not be simultaneously interfaced to both of the transducers specified which you have specified. The CP570 cannot process data from two transducers operating at the same frequencies. Specifically, the transducer ID (xID’s) will not sequence correctly and the GUI will not support the selection of two of the same frequency transducers/elements. This would make you questions concerning interference moot, as the product cannot process two of the same frequency transducers.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)