Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RV-220 transducer kit on 24.5 degree deadrise
04-18-17, 03:06 PM
Post: #1
RV-220 transducer kit on 24.5 degree deadrise
Good afternoon,

According the info I can find, the new RV-220 transducer pack can be fitted to a 13-20 degree deadrise. My Contender 31T has a 24.5 degree deadrise. Will the RV-220 pack work or am I forced to get the transom mount RV transducer?

Thanks in advance for any help,

Lynn
Find all posts by this user
Quote this message in a reply
04-19-17, 10:11 AM (This post was last modified: 04-19-17 10:13 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: RV-220 transducer kit on 24.5 degree deadrise
Welcome to the Raymarine Forum Lynn,

Installing the specified transducer set on a hull having deadrise greater than 20 degrees will create a blind spot under the hull. Unfortunately, Raymarine has not offered a RV thru-hull transducer for hulls having more than 20 degrees of deadrise, leaving only the transom mounted RV transducer option at this time. A feature request will be logged to consider introduction of RV thru-hull transducer from hulls having more than 20 degrees of deadrise.

Please click here more information concerning product and feature suggestions.
Find all posts by this user
Quote this message in a reply
04-20-17, 06:40 PM
Post: #3
RE: RV-220 transducer kit on 24.5 degree deadrise
Thank you very much Chuck, your wealth of knowledge is much appreciated!
Find all posts by this user
Quote this message in a reply
04-21-17, 07:28 AM
Post: #4
RE: RV-220 transducer kit on 24.5 degree deadrise
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)