Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Transducer RV 220 pair
05-10-17, 11:03 AM (This post was last modified: 05-10-17 11:14 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Transducer RV 220 pair
ReelAttitudeBDA,

The mention of a second transducer within the referenced BoatingAdvice YouTube video was not a reference to an Axiom RV220 pair. It was instead inferring that as the Axiom RV and Axim DV MFDs additionally feature internal 600W 50kHz / 200kHz fishfinder sonar circuitry, these MFDs may simultaneously be interfaced to a compatible 50kHz / 200kHz fishfinder transducer to additionally support traditional 50kHz / 200kHz operation in depths greater than would be supported by the RealVision 3D™ transducer and RealVision 3D™ processing circuitry of the MFD. Axiom MFDs are not forward looking sonar products. Any increase in forward bottom coverage associated with additionally interfacing a 50kHz / 200kHz transducer would be associated with a potential increase in the cone angle specification for the 50kHz / 200kHz transducer over the 25 degree cone angle provided by the CHIRP (conical) element of the RealVision 3D™ transducer(s).

The RealVision 3D™ transducer(s) are not designed to interfaced to an ax8 MFD, eSx8 MFD, or CP100. However, following the LightHouse 3 software update for a/c/e/eS/gS-Series MFDs, these MFDs may be interfaced with the Axiom RV MFDs w/RealVision 3D™ transducer(s) to support RealVision 3D™ features on the a/c/e/eS/gS-Series MFD.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Transducer RV 220 pair - Chuck - Raymarine - Moderator - 05-10-17 11:03 AM
RE: Transducer RV 220 pair - Ronnie - 08-31-17, 04:07 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us