Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
eS78 + Axiom not working
05-14-17, 11:30 PM
Post: #1
eS78 + Axiom not working
Hello all!

I recently acquired a 9" Axiom plotter for the cockpit of my sailboat, to complement an eS78 I have at the chart table. They're interfaced via an HS5, along with a Quantum radar.

However, the eS78 has taken a disliking to the Axiom. It seems to alternately acquire and lose the Axiom as a data master, causing it to nearly freeze as it endlessly alerts and quickly recovers: https://goo.gl/photos/XMCMs1zJiJwUin359

I also have a Quantum radar connected to the HS5, which both displays are capable of seeing and using when the other is offline, so I don't think there are network connectivity problems between them.

The Axiom, for its part, correctly identifies the eS78 on the network when prompting for which display to make the Data Master.

I applied all current software updates before making that video - same result.

Any thoughts? Could this be a Lighthouse 2 vs 3 problem?
Find all posts by this user
Quote this message in a reply
05-15-17, 10:45 AM
Post: #2
RE: eS78 + Axiom not working
Welcome to the Raymarine Forum Alx,

Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
05-15-17, 08:11 PM
Post: #3
RE: eS78 + Axiom not working
Ahh, nice, that confirms my suspicions, thank you!

No worries here! The Axiom chartplotter is unbelievable to use, it's so fast and fluid. Totally worth the wait.
Find all posts by this user
Quote this message in a reply
05-16-17, 08:37 AM
Post: #4
RE: eS78 + Axiom not working
You're welcome. Thanks for the feedback!
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)