Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SmartController Checksum Error
05-17-17, 10:15 PM
Post: #1
SmartController Checksum Error
The remote was disconnected from power over the winter and recharged. In past years, this was not a problem. The battery was replaced a year ago.

This year, however, I get a message Checksum Error with a bunch of zeros. Then it says, Press Any Button. When I do, the screen goes blank and the remote is not responsive. Any advice?
Find all posts by this user
Quote this message in a reply
05-18-17, 09:18 AM
Post: #2
RE: SmartController Checksum Error
Welcome to the Raymarine Forum Paul,

Unfortunately, the reported symptom is indicative of a failure within the SmartController's circuitry resulting in loss of its programming. It is recommended that the SmartController be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)