Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom to BV744 Transducer
05-20-17, 02:29 PM
Post: #1
Axiom to BV744 Transducer
Is it possible to connect a BV744 Transducer to the Axiom 7 directly or can it be connected using a CP370 or CP470 module.
Find all posts by this user
Quote this message in a reply
05-22-17, 10:07 AM (This post was last modified: 05-22-17 10:09 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Axiom to BV744 Transducer
Welcome to the Raymarine Forum jmcjmc817,

Raymarine offers three different versions of the B744V transducer:
- A66090 B744V: designed to be mated directly to the following MFDs, fishfinder, and fishfinder sounder modules:
----- ax7/cx7/e7D/ex7/eSx7 MFDs
----- A50D, A57D, A70D MFDs
----- DS400X, DS500X, DS600X Fishfinders
----- DSM25

- A66091 B744V: designed to be mated directly to the following fishfinder sounder modules:
----- CP370
----- DSM300
----- DSM30
----- DSM250

- A26043 B744V: designed to be interfaced to depth, speed, and temperature sensing instrument displays, instrument pods (w/i70 MFID or ST70 MFID), and iTC-5 analog instrument converter (w/i70 MFID or ST70+ MFID)

The A66090 and A66091 B744V transducers may be adapted for use with Axiom DV and Axiom RV MFDs to support use of 50 kHz / 200 kHz fishfinder sonar features. Please click here to view a FAQ addressing this subject. Similarly, the A66091 version of the B744V may be interfaced to a CP370, which may in turn be interfaced to any model of Axiom MFD.

The A26043 B744V instrument transducer may be interfaced one of the items specified above, which may in turn be interfaced to the MFD to permit the MFD to repeat numerical depth, speed, and temperature data.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us