Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A128 Switching off
06-01-17, 07:26 PM
Post: #1
A128 Switching off
My A128 is developing an annoying problem. Figured I would present it here, before contacting a tech for advise or repair.
When selecting screens that I want, such as a split 2D Sonar/ Down Scan or any others, they stay on for 10 sec to 3 min, and then switch back to the Home Screen.
Additionally, today I had to restart it 3 times, just to get past the "accept" intro.
I have tried both reboot procedures and it didn't make any difference. My A127 at the console and my A128 on the bow are linked, but only the A128 is acting up.
Thanks.
Find all posts by this user
Quote this message in a reply
06-02-17, 12:12 PM
Post: #2
RE: A128 Switching off
Welcome to the Raymarine Forum Natch,

Given the symptoms reported (not responding and responding to commands which the operator has not entered), it would appear that the a-Series MFD's touchscreen is beginning to fail. It is recommended that the a128 MFD be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
06-02-17, 05:03 PM (This post was last modified: 06-05-17 07:56 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: A128 Switching off
Thanks Chuck
Find all posts by this user
Quote this message in a reply
06-05-17, 07:57 AM
Post: #4
RE: A128 Switching off
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)