Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Is there Really an Issue with Mounting Axiom 9 within 1 M of Compass?
06-08-17, 11:03 AM
Post: #1
Is there Really an Issue with Mounting Axiom 9 within 1 M of Compass?
The Axiom 9 (E70366) installation sheet (Doc no. 88070-1, 2/17) shows to mount the MFD greater than 1 meter from a binnacle compass. That is essentially impossible on all but the largest sailboats if the MFD is used as the main chart plotter at the helm.

The setup will be as shown in the attached photo with the Axiom 9 replacing the C80 Classic directly above the binnacle compass (0.3 m) away. What issues can I expect? A Mu metal lining in the mounting case is all I can think of at the moment.
Thank You
Dan
Find all posts by this user
Quote this message in a reply
06-08-17, 12:04 PM (This post was last modified: 06-08-17 12:04 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Is there Really an Issue with Mounting Axiom 9 within 1 M of Compass?
Welcome to the Raymarine Forum Dan,

Please click here to view a FAQ addressing this subject.
Visit this user's website Find all posts by this user
Quote this message in a reply
06-10-17, 07:02 PM
Post: #3
RE: Is there Really an Issue with Mounting Axiom 9 within 1 M of Compass?
Excellent FAQ. Thanks!
Find all posts by this user
Quote this message in a reply
06-12-17, 08:45 AM
Post: #4
RE: Is there Really an Issue with Mounting Axiom 9 within 1 M of Compass?
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us