Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Transducer Problem?
06-28-17, 09:51 AM (This post was last modified: 06-28-17 01:41 PM by Chuck - Raymarine - Moderator.)
Post: #9
RE: Transducer Problem?
Steve,

Please click here to view a FAQ addressing this subject. This problem is most commonly caused by the transducer's mounting location with respect to hull features which cause the transducer to be exposed to aerated water.

While Raymarine has not made any specific recommendations for anti-fouling paints for RealVision transducers, it is recognized that marine growth may necessitate the use of anti-fouling paints. Like the recommendations for other fishfinder transducers, it is recommended that a water based anti-fouling paints which do not contain metals (ex. copper, etc.) be used for such purposes.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] Transducer Problem? - bonzoid - 06-12-17, 07:03 PM
RE: Transducer Problem? - bonzoid - 06-15-17, 05:53 PM
RE: Transducer Problem? - bonzoid - 06-18-17, 09:33 AM
RE: Transducer Problem? - joe-al - 06-28-17, 03:59 PM
RE: Transducer Problem? - bonzoid - 07-11-17, 06:53 PM
RE: Transducer Problem? - joe-al - 06-23-17, 11:41 AM
RE: Transducer Problem? - SteveME - 06-28-17, 04:38 AM
RE: Transducer Problem? - Chuck - Raymarine - Moderator - 06-28-17 09:51 AM
RE: Transducer Problem? - joe-al - 08-19-17, 01:28 PM
RE: Transducer Problem? - joe-al - 01-28-18, 09:03 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)