Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
GX2200 AIS to ES75 MFD
03-12-16, 04:42 PM
Post: #1
GX2200 AIS to ES75 MFD
Saw some posts regarding networking the Standard Horizon GX2200 to the ES75. Am I missing something or can I simply use a R70414 cable to go from the GX2200 NMEA 0183 out to the ES75 NMEA 0183 in?

Please let me know
Find all posts by this user
Quote this message in a reply
03-15-16, 09:27 AM
Post: #2
RE: GX2200 AIS to ES75 MFD
Welcome to the Raymarine Forum Gmoney,

The R70414 Video Input / NMEA 0183 Cable may indeed be used to interface an AIS receiver/transceiver to an eS7x MFD. However, while Raymarine's a/c/e/eS/gS-Series MFDs are designed to share AIS (as well as all other system data) with one another via an Ethernet (RayNet/SeaTalkhs) network, these MFDs are not designed to bridge AIS data to SeaTalkng. Accordingly, should one desire to share AIS data with an i70 MFID or other SeaTalkng/NMEA 2000 device, then it would be recommended that the AIS receiver/transceiver be interfaced to the MFD via a powered and properly terminated SeaTalkng backbone. NMEA 0183 AIS receiver/transceiver data may be bridged to SeaTalkng using third party NMEA 0183 to NMEA 2000 data bridging devices (ex. Actisense NGW-1-STNG, etc.).
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)