Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E 80 - 0183 cable
07-06-17, 10:51 AM
Post: #2
RE: E 80 - 0183 cable
Q1. I have a Raymarine SeaTalk Hs high speed network switch with several spare cables, can I bring that gps data into the switch using these cables and then feed the E-80 chartplotter through the switch cables?
A1. It is not possible to interface GPS sensor to the system in the manner which you have suggested. When operating with the v5.69 E-Series Classic MFD software, the E-Series Classic MFDs support receiving GPS data from a source supporting or has been adapted to support SeaTalkng/NMEA 2000 (recommended), SeaTalk, or NMEA 0183 communications. Please click here to view a FAQ addressing how a Raystar 150 GPS Sensor may be adapted to be interfaced to an E-Series Classic MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
E 80 - 0183 cable - rmitch - 07-03-17, 04:36 PM
RE: E 80 - 0183 cable - Chuck - Raymarine - Moderator - 07-06-17 10:51 AM
RE: E 80 - 0183 cable - rmitch - 07-07-17, 07:36 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)