Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RL70C not communicating with RC631
06-01-16, 12:27 PM (This post was last modified: 06-01-16 01:41 PM by Chuck - Raymarine - Moderator.)
Post: #12
RE: RL70C not communicating with RC631
OK I now have everything installed per the attached diagram.

I do have the ST1 #1 buss only powered by the #1 ST1-STNG Converter, there is no power going to the #1 buss from any other source. The #1 buss supports (5) ST1 devices and seems to be working fine

The second ST1-STNG converter is only powered by the backbone. I have the ST1 going to the 400G course computer and from the 400G the ST1 goes to the ST6001 control head. Both these connections have the yellow, red and silver attached. This ST1-STNG converter supports (2) ST1 devices. Not sure this is the proper way to connect, please confirm?

Lastly I have the NMEA0183 out on the 400G running to the NMEA0183 in on the E125, is this also correct? If so what is this connection actually providing to the system? Is this the fast heading?

thank you


Attached File(s)
.pdf  Kismet RM layout.pdf (Size: 917.06 KB / Downloads: 350)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: RL70C not communicating with RC631 - dkritter - 06-01-16 12:27 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)