Raymarine forum / Raymarine Forums / Multifunction Displays v / RL70C not communicating with RC631

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RL70C not communicating with RC631
03-14-16, 03:40 PM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: RL70C not communicating with RC631
dkritter,

It is recommended that the hsb2 port of the display be tested first. If a fault is found with the hsb2 port of either display, then there is no need to proceed with further resistance testing. From there, testing should be performed to the inline termination plugs and then finally with the cables.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: RL70C not communicating with RC631 - Chuck - Raymarine - Moderator - 03-14-16 03:40 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication