Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Downvision = blackscreen
07-07-17, 06:35 PM
Post: #1
Downvision = blackscreen
I tried the downvision yesterday for the first time this season. It is a black screen but shows the depth in the data box. Is this an indication of a bad ducer??
Find all posts by this user
Quote this message in a reply
07-10-17, 12:47 PM (This post was last modified: 07-10-17 01:29 PM by Dave - Raymarine - Moderator.)
Post: #2
RE: Downvision = blackscreen
Hello ubettcha,

What version of Downvision are you using? Is this with your built in sonar? e.g., es78? Or are you using a CP100?
Find all posts by this user
Quote this message in a reply
07-10-17, 06:42 PM
Post: #3
RE: Downvision = blackscreen
This unit is an A68
Find all posts by this user
Quote this message in a reply
07-14-17, 12:58 PM
Post: #4
RE: Downvision = blackscreen
Hello ubettcha,

Thank you for your response.

If your numerical depth reading is displayed in the databar, or another fishfinder screen, then you may be seeing a depth reading from a different transducer/sounder on board. You are able to change the transducer providing your depth reading for your display by following these button presses: From Home screen> setup> system settings> data sources> depth> select your depth source.

If the numerical depth reading is in the bottom left corner of a single Downvision fishfinder screen, there is a possibility the angle of your transducer is affecting its performance. If you are using a transom mounted transducer, I would try changing the angle of it. The transducer may be missing a lot of the return sound wave and the sounder is not able to produce a proper image, but has enough coming back to produce a numerical readout.

If changing the angle of the transducer does not help, and you have checked all settings are normal, then you may have something wrong with the transducer.

- Dave
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)