Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
L1250 Replacement
07-18-17, 08:01 AM
Post: #1
L1250 Replacement
Hi guys,

Hello, I have a l1250 in my boat and it has been there since 2001, a few days ago the screen no longer shows anything. Because of this I decided to change it for a new one, which model I can put using the same wiring for radar, fish finder and gps?

Thank you!
Find all posts by this user
Quote this message in a reply
07-18-17, 08:47 AM
Post: #2
RE: L1250 Replacement
Welcome to the Raymarine Forum Juangoma23,

Unfortunate, replacement of the L1250 with one of Raymarine's currently manufactured MFDs is not quite as simple as you have implied. Please click here and here to view to view FAQs addressing this subject.
Find all posts by this user
Quote this message in a reply
07-19-17, 09:32 AM
Post: #3
RE: L1250 Replacement
Hey Chuck, I have tried to get another L1250 but I have not found it, what would be the models compatible with the wiring I already have? In the marina Where I am there is no lifter to take the boat out of the water and make the changes of the other instruments, that is one of the main reasons why I need a display that is only plug and play.
Find all posts by this user
Quote this message in a reply
07-19-17, 11:06 AM
Post: #4
RE: L1250 Replacement
Juangoma23,

Is the currently installed transducer directly connected to the L1250; or has it been interfaced to a DSM250, DSM30, or DSM300 which in turn has been interfaced to the L1250? Does the L1250 have a RayChart reader into which C-Map C-Cards are inserted?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)