Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Adding a C/E-Series Widescreen MFD(s) to a network featuring E-Series Clasic MFDs
03-14-16, 02:18 PM (This post was last modified: 01-11-17 04:22 PM by Chuck - Raymarine - Moderator.)
Post: #1
Adding a C/E-Series Widescreen MFD(s) to a network featuring E-Series Clasic MFDs
Adding a C/E-Series Widescreen MFD(s) to a network featuring E-Series Clasic MFDs

Unfortunately, C/E-Series Widescreen MFDs may not be interfaced to an Ethernet (SeaTalkhs/RayNet) network which also features E-Series Classic MFDs. While it is possible to interface an E-Series Classic MFD to a common SeaTalkng backbone to which a C/E-Series Widescreen MFD also been interfaced, communications would be limited to alphanumeric, GPS, instrument, navigational, and system status data between these systems. Correspondingly, it is not possible for E-Series Widescreen MFDs to share graphical data (ex. radar imagery, fishfinder imagery, cartography, or Sirius Marine Weather) with an E-Series Classic MFD.

Should full functionality dual station or multi-station capability be desired, then it would be necessary that all MFDs be E-Series Classic MFDs, all MFDs be C-Series Widescreen MFDs (only two MFDs permitted), or all MFDs be E-Series Widescreen MFDs.

RAYFAQ#
Visit this user's website Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us