Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ax7 transducer plug, pin diagram
08-02-17, 07:07 PM
Post: #1
ax7 transducer plug, pin diagram
Hello,
Looking at all the information its been posted, I saw a diagram of the transducer conector pins on the ax7 MDF, now I want to go back to it to take a closer look and I can't find it.
Could you post it or let me know were to find it?
Thanks.
Find all posts by this user
Quote this message in a reply
08-03-17, 08:34 AM (This post was last modified: 08-03-17 08:42 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: ax7 transducer plug, pin diagram
Welcome to the Raymarine Forum kechikan,

Please click here to view a FAQ addressing this subject. Please note that any damage caused to the MFD's fishfinder circuitry resulting from modification of a transducer (to include its cable) or use of transducers other than those which have been designed for use with a/c/e/eS/gS-Series MFDs may void the MFD's warranty. Should you be unable to replace the currently installed thru-hull transducer, the hull is manufactured from solid, non-cored fiberglass which is less then 5/8" thick, then you may want to consider installing an A80170 P79 In-Hull Fishfinder Transducer.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)