Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
12 KW scanner not recognized by MFD
08-11-17, 11:19 AM
Post: #1
12 KW scanner not recognized by MFD
we have a new 12 KW radar scanner E92160E S/N 0650012 which stops working, suddenly it was not recognized by any of the displays, we also have a 4Kw open array scanner on board. The cables from the scanner were swapped and nothing happens.

Both VCM100 indicates the ON ligth lit, also the Sealtalk HS router was checked and we tried other empty slots for the signal cable from the scanner

We still have the 12 KW radar not recognized, the 4 KW radar is working
Wath would you recommend to check out?
Find all posts by this user
Quote this message in a reply
08-22-17, 03:11 PM
Post: #2
RE: 12 KW scanner not recognized by MFD
Welcome to the Raymarine Forum Pedro,

What model of MFD is installed onboard the subject vessel?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)