Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
TackTick T122 NMEA interface not repeating DPT input
09-01-17, 11:03 AM (This post was last modified: 09-01-17 12:05 PM by Chuck - Raymarine - Moderator.)
Post: #11
RE: TackTick T122 NMEA interface not repeating DPT input
Thanks. I will just work around it. You may want to document it if you decide not to change it.
Find all posts by this user
Quote this message in a reply
09-01-17, 12:05 PM
Post: #12
RE: TackTick T122 NMEA interface not repeating DPT input
You're welcome.
Find all posts by this user
Quote this message in a reply
09-22-17, 10:37 PM
Post: #13
RE: TackTick T122 NMEA interface not repeating DPT input
Just for the record, it will not repeat speed either. In fact, the sentence IIVHW has the heading but speed is blank even though speed it input to the interface.

But I have solved my problem by working around it. I added my depth sentence to a speed interface I built using an Arduino.
Find all posts by this user
Quote this message in a reply
09-25-17, 11:46 AM
Post: #14
RE: TackTick T122 NMEA interface not repeating DPT input
allene,

Thanks for the additional information, it will be added to the corresponding engineering report which had been previously submitted.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)