Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
anchor chain counter
09-01-17, 12:51 PM
Post: #1
anchor chain counter
do either i70 or e7D understand any PGN's relating to anchor chain counters - if so what models of chain counters are compatible ?? SeatalkNG or 0183

I would like to read how much rode is deployed while anchoring. I can operate the windlass from the cockpit but its too far to read the markings on the chain or line.

Thanks
Les
Find all posts by this user
Quote this message in a reply
09-14-17, 10:50 AM
Post: #2
RE: anchor chain counter
Welcome to the Raymarine Forum Les,

Raymarine's a/c/e/eS/gS-Series MFDs support LightHouse II software and Raymarine's Axiom MFD's support LightHouse 3 software. Depending upon testing results, LightHouse 3 software may be able to be installed on eS/gS-Series MFDs.
Unfortunately, neither Raymarine's MFDs running LightHouse 3 software nor Raymarine's MFDs running LightHouse II software support displaying the amount of anchor rhode which as been deployed by a windlass. A feature request will be logged to consider including support for displaying anchor rode from a NMEA 2000 data source within a future LightHouse 3 software update. No LigthHouse II software updates are currently expected to follow the v19.03 software update.

Please click here more information concerning product and feature suggestions.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)