Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Can't get rocks to NOT display
08-30-17, 02:38 PM
Post: #1
Can't get rocks to NOT display
Regardless of the setting on our ES98 and A65 MFDs, our navionics charts display ALL rocks, regardless of depth. This means that we have open areas with rocks at over 100ft, that are displayed along with any relevant rocks at 18ft or less. It makes for a very cluttered interface, and real risk of a "boy who cried wolf" situation, where we get so sick of looking at all these rocks that are no danger whatsoever, that we miss one that really is. Please help. I was told before that updating to lighthouse 19 would probably solve the issue. It made no difference.
Find all posts by this user
Quote this message in a reply
08-30-17, 02:55 PM (This post was last modified: 08-30-17 02:56 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Can't get rocks to NOT display
Welcome to the Raymarine Forum Randy,

In order to provide clarification, please use the MFD's screen capture feature to capture the screen of the Chartplotter application when it is exhibiting the reported issue. The screen capture will be saved as a .png file within the root level directory of the microSD memory card. Please attach this screen captur to your response to this thread. Please additionally specify the type of cartography which you are using with the MFD.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us