Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Transducer for trolling motor ES 128
09-07-17, 09:58 AM (This post was last modified: 09-07-17 10:51 AM by Chuck - Raymarine - Moderator.)
Post: #1
Transducer for trolling motor ES 128
I have 2 each of the MFD 128 ES. I want to mount one up front for my trolling motor on a 2016 Ranger Z-21. I have a Fortrex MinnKota trolling motor 102 thrust with built in transducer. Could you give me the product numbers for the transducer if the Minn Kota transducer will not work with the RayMarine. Also any mounting device or extra cable I may need.
Find all posts by this user
Quote this message in a reply
09-07-17, 10:51 AM
Post: #2
RE: Transducer for trolling motor ES 128
Welcome to the Raymarine Forum fishing1,

Should you view Universal Sonar 2's web page, you will not find any of Raymarine's MFDs or fishfinders listed. The transducer socket of the eSx8 MFDs is exclusively designed to be mated to one of the transducers found here. Raymarine offers the A80330 CPT-100DVS Trolling Motor Transducer Bracket for installing an A80351 CHIRP (conical) / DownVision Transducer onto a trolling motor. The specified transducer's cable will plug directly into the eSx8 MFD's Transducer socket.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us