Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Lighthouse III Oil Pressure Data
09-08-17, 10:18 AM
Post: #1
Lighthouse III Oil Pressure Data
Hi guys... I have an e127 and Axiom 12 RV installed on my helm. Both units are running the latest software available. I'm using a Mercury NMEA 2000 gateway to provide engine data to both MFDs.

On the e127, all engine data is present, including oil pressure. However, the Axiom is not showing oil pressure (see attached pics).

I've tried to edit the page to see if there are other oil pressure options available, however, the circular engine data graphic that contains the gears, oil, water, RPM info, does not appear to be editable.

Any thoughts or suggestions on how to get the Axiom to display oil pressure?

Thanks in advance.
Find all posts by this user
Quote this message in a reply
09-12-17, 03:25 PM
Post: #2
RE: Lighthouse III Oil Pressure Data
Welcome to the Raymarine Forum trush640,

I'm a bit confused, as your screen capture of the Axiom MFD appears to correctly show blue arrows outboard of the RPM ring indicating oil pressure of approximately 50 PSI for each engine. Did I misunderstand your report?

[Image: attachment.php?aid=1285]
Find all posts by this user
Quote this message in a reply
09-13-17, 09:32 AM
Post: #3
RE: Lighthouse III Engine Temp Data
My apologies Chuck... I meant Engine Temperature! I've corrected the Post Subject as well.
Find all posts by this user
Quote this message in a reply
09-13-17, 09:48 AM (This post was last modified: 03-07-18 02:29 PM by Chuck - Raymarine - Moderator.)
Post: #4
RE: Lighthouse III Oil Pressure Data
Thanks for the correction. Unfortunately, the graphically represented engine gauges cannot be modified to display other data items. However, the numerical data cells (ex. depth, battery voltage, SOG) may be modified to display engine oil temp instead of the data items which are currently indicated.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)