Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Upgrading plotter to C97 from RL70C, for use with ST60 instruments
10-17-17, 08:55 AM
Post: #1
Upgrading plotter to C97 from RL70C, for use with ST60 instruments
Hello,
I am upgrading from aa RL70C pathfinder radar/plotter to a C97. I will be installing the seatalk to seatalkng interface for compatibility with my ST60 instruments.
Is it possible to replace the ST60 transducers with a tri-transducer that doesn’t have the paddle wheel for speed/log or would I need to replace the ST60 completely?
Thanks for any help.
Find all posts by this user
Quote this message in a reply
10-17-17, 10:59 AM
Post: #2
RE: Upgrading plotter to C97 from RL70C, for use with ST60 instruments
Welcome to the Raymarine Forum ndp,

ST60 Speed/Tridata instruments may not be directly interfaced to a instrument transducers lacking a paddlewheel. However, should the transducer feature a NMEA 2000 communications interface and no speed/temp transducer be interfaced to the ST60 Speed/Triducer instrument, then the NMEA 2000 speed transducer may be interfaced as a spur to the SeaTalkng backbone to which the MFD has also been interfaced as a spur. Should the ST60 Speed/Tridata's configuration settings then be configured to support having the instrument function as a Speed repeater, then speed information from the NMEA 2000 speed transducer.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us