Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NMEA loads on a STng to NMEA convertor
03-22-16, 02:43 AM
Post: #1
NMEA loads on a STng to NMEA convertor
I need to provide NMEA0183 GPS signals to 4 devices: 2 VHF radios, 1 AIS and 1 NAIAD stabilizer. How many NMEA0183 loads can be driven by a single model E70196 STng to NMEA convertor?
Find all posts by this user
Quote this message in a reply
03-22-16, 08:06 AM
Post: #2
RE: NMEA loads on a STng to NMEA convertor
Welcome to the Raymarine Forum Lew,

Raymarine products featuring a NMEA 0183 output port are designed to support being able supply data to up to three NMEA 0183 listeners. Should additional NMEA 0183 listeners require GPS data from the SeaTalkng backbone, then it is recommended that an additional SeaTalk to SeaTalkng Converter(s) be installed to support supplying data to the additional NMEA 0183 listeners. Alternatively, a third party NMEA 0183 expander may interfaced to the NMEA 0183 output of the SeaTalk to SeaTalkng Converter to support the additional NMEA 0183 listeners.
Visit this user's website Find all posts by this user
Quote this message in a reply
03-22-16, 09:57 AM
Post: #3
RE: NMEA loads on a STng to NMEA convertor
Thank you !
Find all posts by this user
Quote this message in a reply
03-22-16, 10:11 AM
Post: #4
RE: NMEA loads on a STng to NMEA convertor
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us