Thread Closed 
 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Replacement radar transducers for E-Series Classic MFDs and C/E-Series Widescreen MFD
11-02-17, 10:30 AM
Post: #1
Replacement radar transducers for E-Series Classic MFDs and C/E-Series Widescreen MFD
Replacement radar transducers for E-Series Classic MFDs and C/E-Series Widescreen MFDs, and G-Series GPM400.

The subject MFDs are not compatible with Quantum radar transducers. The following radar transducers featuring an Ethernet communications interface are compatible with E-Series Classic MFDs (E80, E120), C-Series Widescreen MFDs (C90W, C120W, C140W), E-Series Widescreen MFDs (E90W, E120W, E140W), and the G-Series GPM400:

- RD418D 4kW 18" Digital Radome (retired)
- RD424D 4kW 24" Digital Radome (retired)
- RD418HD 4kW 18" HD Digital Radome
- RD424HD 4kW 24" HD Digital Radome
- RA1048HD 4kW 48" HD Color Open Array
- RA1072HD 4kW 72" HD Color Open Array
- RA3048HD 12kW 48" HD Color Open Array
- RA3072HD 12kW 72" HD Color Open Array
- RA1048SHD 4kW 48" SHD Color Open Array
- RA1072SHD 4kW 72" SHD Color Open Array
- RA3048SHD 12kW 48" SHD Color Open Array
- RA3072SHD 12kW 48" SHD Color Open Array

The above listed radar transducers must be interfaced to the system via a Digital Radar Cable or cable assembly constructed from a Digital Radar Extension Cable and a Digital Radar Cable. The latter is recommended for sailing vessels.

While the E-Series Classic MFDs were compatible with a line of Raymarine radar transducers featuring an analog video interface, these radar transducers have not been offered for several years. If seeking a replacement radar transducer for an E-Series Classic MFD, then it is recommended that one of the above listed radar transducers along with a Digital Radar Cable be purchased.


RAYFAQ#
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)