Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E120 Classic to C125 3rd gen
11-01-17, 02:31 PM
Post: #1
E120 Classic to C125 3rd gen
Digital Radar cat 5 - Seatalk HS
St 6- plus wind, depth, speed and tridata in series (seatalk)
ray GPS 125 Seatalk
ST 7002 plus auto pilot head
Smart Pilot S3

I have the E22158 seatalk converter to Seatalk hs/hg

Do I plug the last instrument to the converter (minus power?
Find all posts by this user
Quote this message in a reply
11-01-17, 03:37 PM
Post: #2
RE: E120 Classic to C125 3rd gen
Welcome to the Raymarine Forum iimatias,

Am I to understand that you will be replacing the E120 E-Series Classic MFD with a c125 MFD? If so, then please click here to view a FAQ addressing this subject. As SeaTalk is being phased out in favor of SeaTalkng / NMEA 2000 communications and any new product additions will likely feature a SeaTalkng communications interface, it is not considered a best practice to have a SeaTalk bus backfeed power into a SeaTalkng / NMEA 2000 backbone. As the present SeaTalk bus features more than five devices, it would be recommended that the SeaTalk bus be divided into to SeaTalk busses per the referenced FAQ. Each SeaTalk bus will in turn be connected to its own SeaTalk to SeaTalkng Converter. The SeaTalk to SeaTalkng Converters will be interfaced to one another via an an appropriate length of SeaTalkng Backbone Cable.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us