Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom 9 power and RV100 transducer connector size
11-13-17, 03:14 PM
Post: #1
Axiom 9 power and RV100 transducer connector size
Does anyone know what size the connectors are for an Axiom 9 with RV 100 transducer?

I am installing on a Boston Whaler 170 Montauk console and want to make sure the pass through fits the connector. The cables will come through the top of the console so waterproof is critical to me. I’m need to order the best possible cable glam.TIA
Find all posts by this user
Quote this message in a reply
11-13-17, 05:04 PM
Post: #2
RE: Axiom 9 power and RV100 transducer connector size
Welcome to the Raymarine Forum Tojo,

Please click here to view a FAQ addressing chasing cables. As indicated within the referenced FAQ, fishfinder transducer cables should never be cut, spliced, or modified. The RV transducer's plug requires a 1" diameter [censored] / passage. The plug of the Axiom Pro MFD's requires a 1-1/8" diameter [censored] / passage. The plug of the Axiom MFDs requires a 1" diameter [censored] / passage.
Find all posts by this user
Quote this message in a reply
11-13-17, 06:34 PM (This post was last modified: 11-14-17 09:17 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: Axiom 9 power and RV100 transducer connector size
Thank you Chuck
Find all posts by this user
Quote this message in a reply
11-14-17, 09:18 AM
Post: #4
RE: Axiom 9 power and RV100 transducer connector size
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)