Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Speed Sensor for Axiom Pro
11-13-17, 08:58 PM
Post: #1
Speed Sensor for Axiom Pro
I am upgrading an E120 classic system to Axiom Pro. The current system has a DSM-300 Module with the ST-800 Speed/Temp Sensor combined with a B260 Depth Transducer via a "Y" cable. The DSM-300 connects to the E120 via the SeaTalk HS switch.

I want to upgrade the dual frequency B260 transducer to a CHIRP capable B265 which I understand connects directly to the Axiom PRO RVX unit.

How do I add the ST-800 (or some other Speed Sensor) to the Axiom Pro System.

Thanks,

Jon Spain
Find all posts by this user
Quote this message in a reply
11-14-17, 02:02 PM
Post: #2
RE: Speed Sensor for Axiom Pro
Welcome to the Raymarine Forum Jon,

High power CHIRP transducers and CP370/CP300/DSM30/DSM300 compatible speed / temp transducers may be mated to an A80345 CP470-CP570 Speed-Temp Sensor Y-Cable to permit CP370/CP300/DSM30/DSM300 compatible speed / temp transducers be used CP470 / CP570 CHIRP Sounder Modules or with Axiom Pro RVX MFDs.
Find all posts by this user
Quote this message in a reply
11-15-17, 12:49 PM
Post: #3
RE: Speed Sensor for Axiom Pro
Chuck,

Thank-you very much for that information.

Jon
Find all posts by this user
Quote this message in a reply
11-15-17, 12:56 PM
Post: #4
RE: Speed Sensor for Axiom Pro
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)