Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E Series Classic Display (E120)
11-27-17, 09:36 PM
Post: #1
E Series Classic Display (E120)
Hi, I want to replace my old E Series Classic Display (E120), which should I buy?
Find all posts by this user
Quote this message in a reply
11-28-17, 05:29 AM (This post was last modified: 11-28-17 10:41 AM by Derek - Raymarine - Moderator.)
Post: #2
RE: E Series Classic Display (E120)
Welcome to the Raymarine Forum,

The E120 Classic display can be replaced with our current AXIOM 12 PRO range, the exact model would be determined by the choice between built-in sonar options, whether you have a preference for CHIRP conical Sonar or Realvision 3D Sonar.

See link to our website http://www.raymarine.co.uk/multifunction...axiom-pro/

Please note that AXIOM PRO will interface with the following data formats, STng, NMEA0183 and RayNet, whereas the E120Classic will interface with SeaTalk, NMEA0183 and RayNet. So if you have a SeaTalk network onboard and wish to interface this to the AXIOM PRO, then you will need a SeaTalk to STng converter.

Please also note that the AXIOM PRO will only connect to a digital radar, so if the E120 Classic is connected to an Analogue radar, then the radar antenna will also need to be changed to a digital varion or to a Quantum radome.

Please review the FAQ
http://forum.raymarine.com/showthread.php?tid=4324
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)