Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Multiple AX8 cameras in a system
11-30-17, 07:07 AM (This post was last modified: 12-01-17 10:50 AM by Chuck - Raymarine - Moderator.)
Post: #1
Multiple AX8 cameras in a system
The AX8 Marine Thermal Monitoring system can -
-Stream live thermal video of exhaust manifolds, propeller shafts, electrical panels, and other machinery
-Program specific areas to generate automated spot alarms when temperatures exceed pre-set thresholds
-Evaluate ongoing temperature trends

Up to 8 AX8 thermal cameras can be connected into a Raymarine ethernet system and can be displayed, 4 at a time on a thermal camera app on a Raymarine a/c/e/eS/gS and AXIOM multifunction MFD running current software

Full specification details of the AX8 thermal cameras are available here.

Currently the MFD control is restricted to Feed selection (ie MSX/ Thermal/ Visible) and Light (On/Off) .

All set up and calibration of the temperature measurements, including configuration of Thermal hotspots, alarm zones, alarm hi/ Lo levels, needs to be done through the web interface. Contact your local Raymarine dealer for further details.

Any alarm triggered by a thermal hotspot or Zone will be identified by an Alarm Message which reads “AX8 Camera temperature alarm - <camera name>”, thereby identifying which camera and location has triggered the alarm.


RAYFAQ#
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us