Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Chirp channel selection Axiom 9 RV-100 transducer
12-13-17, 02:50 PM (This post was last modified: 12-13-17 04:06 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] Chirp channel selection Axiom 9 RV-100 transducer
I note on the advanced user guide , depending on transducer you can pick high, medium or low chirp channels. I have an Axiom 9 with RV-100 transducer, should I be able to select these options with this transducer ?

Thanks in advance

Greg
Find all posts by this user
Quote this message in a reply
12-13-17, 04:07 PM
Post: #2
RE: [CA] Chirp channel selection Axiom 9 RV-100 transducer
Welcome to the Raymarine Forum Greg,

The feature which you have referenced is not applicable to the RV transducers. These CHIRP selection features are applicable to 1kW CHIRP CP470/CP570 compatible transducers. Should the Axiom RV MFD be interfaced to a Y-Cable, which in turn was interfaced the RV-100 and to a 1kW CHIRP CP470/CP570 compatible transducer / transducer pair, then the feature which you have inquired about would be accessible. With respect to conical CHIRP sonar imagery, RV and DownVision transducers exclusively support high CHIRP.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us