Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Axiom Pro Adapter Plates
12-31-17, 11:07 AM (This post was last modified: 01-02-18 04:14 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] Axiom Pro Adapter Plates
I am considering upgrading my C140W system to the Axiom Pro line. I noted the availability of adapter plates for certain equipment combinations. Specifically:
A80533 Axiom Pro 16 adapter plate for legacy E140W / e165 MFDs
Fixing holes: New
Model: Axiom Pro 16 (All variants)

Will this plate also adapt the C140W?

Is there an actual photo or dimensional drawing available for this product?

Are there any photos available of an Axiom Pro mounted in an adapter plate?
Find all posts by this user
Quote this message in a reply
01-02-18, 04:13 PM (This post was last modified: 01-02-18 04:14 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA] Axiom Pro Adapter Plates
Welcome to the Raymarine Forum jwasko,

The E-Series Widescreen MFDs (E90W, E120W, E140W) and C-Series Widescreen MFDs (C90W, C120W, C140W) feature identical footprints and cutouts. Accordingly, Axiom Pro adapter plates designed for E-Series Widescreen MFDs may also be used with the corresponding C-Series Widescreen MFDs. The template for the C/E140W to Axiom Pro16 Adapter Plate may be found here. Unfortunately, I don't have ready access to a photo of this adapter plate.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)