Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Dragonfly 7 Pro Transducer
01-05-18, 09:21 PM (This post was last modified: 01-09-18 10:02 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] Dragonfly 7 Pro Transducer
Just got a DF 7 Pro....wondering what is the round thing just above the transducer? Maybe a RF choke?
And I am going to mount to trolling motor with correct mounting bracket BUT trying to figure out best way to do this without causing too much bend in the cable. Curious if anyone had any suggestions.
Find all posts by this user
Quote this message in a reply
01-09-18, 10:14 AM (This post was last modified: 01-10-18 09:31 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA] Dragonfly 7 Pro Transducer
Welcome to the Raymarine Forum volfanatic13,

Unlike the CPT-60 transducer which had been introduced with the first generation of Dragonfly fishfinders, the cable of the CPT-DV and CPT-DVS transducers exits from the leading edge of the transducer rather than from the top of the transducer. The round plastic disk molded onto the transducer end of the CPT-DV and CPT-DVS transducer's cable is designed to reduce the chances of having the CPT-DV and CPT-DVS transducer's cable chafe against the hull.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us