Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E85001 Seatalk 1 to NMEA 0183 Converter
03-27-16, 01:29 PM
Post: #1
E85001 Seatalk 1 to NMEA 0183 Converter
Since the E85001 is no longer available, what options are available to make this conversion?

Thanks!
Find all posts by this user
Quote this message in a reply
03-28-16, 09:37 AM
Post: #2
RE: E85001 Seatalk 1 to NMEA 0183 Converter
Welcome to the Raymarine Technical Forum Baja [censored],

Raymarine has not introduced a direct replacement for E85001 PC/SeaTalk/NMEA 0183 Interface Module. Most chartplotting displays and Multifunction Displays (MFDs) produced by Raymarine feature a NMEA 0183 interface and the chartplotting displays / MFDs bridge SeaTalk (and/or SeaTalkng) to NMEA 0183. Should specify the makes/models of marine electronics installed onboard the vessel and additionally specify the make/model of device or computer application which you are seeking to supply with data from your system in NMEA 0183 protocol, then it may be possible to suggest an alternate solution.
Find all posts by this user
Quote this message in a reply
03-30-16, 05:21 AM
Post: #3
RE: E85001 Seatalk 1 to NMEA 0183 Converter
Customer wants depth data from an ST60+ Depth to be displayed on a non-Raymarine chartplotter via a NMEA 0183 interface.
Find all posts by this user
Quote this message in a reply
03-30-16, 01:04 PM
Post: #4
RE: E85001 Seatalk 1 to NMEA 0183 Converter
Baja [censored],

Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
03-31-16, 04:59 AM
Post: #5
RE: E85001 Seatalk 1 to NMEA 0183 Converter
Ok. Thanks. Looks like this will be expensive.
Find all posts by this user
Quote this message in a reply
03-31-16, 08:07 AM
Post: #6
RE: E85001 Seatalk 1 to NMEA 0183 Converter
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)