Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] Adding an EV1 Heading Sensor to Axiom?
01-08-18, 02:00 PM (This post was last modified: 01-08-18 10:05 PM by Tom - Raymarine - Moderator.)
Post: #1
[TG] Adding an EV1 Heading Sensor to Axiom?
I would like to have heading data on my NMEA 2000 network for the Axiom panel to use, the EV1 looks like the correct product but it is setup for a SeaTalkng network.

Is it easy/possible to connect the EV1 directly to the NMEA 2000 net without creating a separate SeaTalkng bus? Maybe an adapter cable between the EV1 and the NMEA T connector?

Thanks in advance for the help.
Find all posts by this user
Quote this message in a reply
01-08-18, 10:08 PM
Post: #2
RE: [TG] Adding an EV1 Heading Sensor to Axiom?
Hello pinkish_panther,

No problem. The only difference between STNG and vanilla NMEA2000 is the connector/cabling type: an adaptor cable is all you need. Part A06075 (http://www.raymarine.com.au/view/?id=5536) should do what you need.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
01-09-18, 11:47 AM
Post: #3
RE: [TG] Adding an EV1 Heading Sensor to Axiom?
Thanks for the quick answer and path to the correct cable!
Find all posts by this user
Quote this message in a reply
01-10-18, 09:38 AM
Post: #4
RE: [TG] Adding an EV1 Heading Sensor to Axiom?
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us