Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Axiom navigation depth markings ?
01-20-18, 07:01 PM (This post was last modified: 01-23-18 04:05 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] Axiom navigation depth markings ?
I have an Axiom 7 with the Navionics card installed. In the navigation screen with detailed layers set the depth markings are very hard to find. They are on the screen but not many. I’m comparing the screen to a third party chartplotter which had numerous depth footages compared to my Axiom. Am I doing something wrong?
Find all posts by this user
Quote this message in a reply
01-23-18, 04:04 PM
Post: #2
RE: [CA] Axiom navigation depth markings ?
Welcome to the Raymarine Forum Wayne,

The Chart application's EasyView configuration setting (SETTINGS->LAYERS->EASYVIEW) is designed to declutter the chart. Such decluttering includes reducing the number of spot soundings which are displayed. It is recommended that you verify that the Chart application's EasyView configuration has been configured OFF.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)