Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Installation of CPT-100 & RV-100
01-22-18, 03:52 PM (This post was last modified: 01-22-18 04:01 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] Installation of CPT-100 & RV-100
How far apart should the RV-100 be from the CPT-100 to prevent any type of problem?
Find all posts by this user
Quote this message in a reply
01-22-18, 03:59 PM (This post was last modified: 01-22-18 04:02 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA] Installation of CPT-100 & RV-100
Welcome to the Raymarine Forum Lee,

As the RV-100 supports DownVision sonar imaging and high CHIRP conical sonar imaging supported by the CPT-100, one would not typically install both of these transducers onboard the vessel. Accordingly, Raymarine has not specified a minimum separation for these transducers or any other transducers for that matter.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)