Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] AIS650 Heading Information Input
01-27-18, 01:42 PM (This post was last modified: 01-30-18 03:45 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] AIS650 Heading Information Input
Some Class B AIS transceivers support broadcast of heading data

Does the AIS650 support this?

If so, then is the data source of heading information (a), (b) or both

[a] NMEA0183 HDT sentence
[b] STNG PGN127250 (heading) AND PGN127258 (Variation) e.g. from an EV1 and MFD respectively from which true heading may be derived.

Thank you
Find all posts by this user
Quote this message in a reply
01-30-18, 03:43 PM (This post was last modified: 01-30-18 03:44 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA] AIS650 Heading Information Input
Welcome to the Raymarine Forum Wooly,

While Class A AIS transceiver, such as Raymarine's AIS950, are designed to be interfaced to a source of True Heading data and to transmit this data, Raymarine's Class B AIS transceivers are not designed to transmit heading data. Raymarine's Class B AIS transceivers are designed to transmit course over ground (COG) determined from the Class B AIS transceiver's internal GPS receiver.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us