Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Navionics and CMap
02-05-18, 05:27 PM (This post was last modified: 02-08-18 04:16 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] Navionics and CMap
This may seem like a silly question, is it possible to have two MFD's, E95 and C95 each with different cartography such that the display could be viewed with Cmap or Navionics at the viewer selection?

In some areas such as the Bahamas it would be preferable to have Cmap and in other areas such as the coast of Florida Navionics would be my choice. Are the waypoints stored in system memory such that either chart can access them?

Many thanks

David
Find all posts by this user
Quote this message in a reply
02-08-18, 04:26 PM
Post: #2
RE: [CA] Navionics and CMap
Welcome to the Raymarine Forum David,

Should the MFDs have been interfaced via an Ethernet Network, then the MFD's may indeed share cartography and would also be capable of displaying a page having two Chart application panes, with each pane displaying a different type of cartography. Method of interfacing the MFDs via an Ethernet Network include:
- interfacing an Ethernet Network port of one MFD to the Ethernet Network port of another MFD via an appropriate length of RayNet (F) to RayNet (F) Cable
- interfacing each MFD to a HS5 RayNet Network Switch via an appropriate length of RayNet (F) to RayNet (F) Cable.

Please click here to view a FAQ addressing displaying cartography with these MFDs.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)