The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Replacement System
02-06-18, 12:40 AM (This post was last modified: 02-08-18 02:22 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] Replacement System
Hi Chuck

I have a question about the replacement of an ST8002 Head Unit, S2 Computer and Type 1 Pump autopilot system with a P70r, ACU200 & EV1 re-utilizing the Type 1 pump. The owner is unhappy with the performance of the old system with multiple attempts at commissioning and autopilot compass relocation & calibration. This over 1-1.5 years of ownership. He has asked me to replace it with a new system.

The question I had is the suitability of an ACU200 used with a Hynautic servo cylinder power steering system. I just wanted to make sure the ACU can handle this type of system before proceeding. I can't imagine why it wouldn't but just wanted to double check with you in case there is any known issues.

The last question I had is that the Type 1 pump is installed almost at the helm itself rather than close to the rudder cylinder. I know that Raymarine guidelines are to mount close to the cylinders as possible but was interested to know if that placement is still acceptable.

As always, thanks for you help.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] Replacement System - PetrelMarine - 02-06-18 12:40 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)