Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] CPT-110 with Axiom?
02-12-18, 09:51 AM (This post was last modified: 02-12-18 05:27 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] CPT-110 with Axiom?
Hello!

I have a CPT-110 transducer currently installed on my 30' sailboat, as well as two Axiom MFDs, one of which is RV-capable. However, I don't believe the CPT-110 is compatible with the Axiom, am I correct?

If so, which sonar module(s) would be required to interface the CPT-110 with the Axiom?

Thanks,
Alex
Find all posts by this user
Quote this message in a reply
02-12-18, 05:31 PM (This post was last modified: 02-12-18 05:32 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA] CPT-110 with Axiom?
Welcome to the Raymarine Forum alx,

No sonar module would be required. The A80490 Transducer Adapter Cable may be used to adapt the CPT-110 to be mated to the Transducer socket of the Axiom RV MFD. Should the two Axiom MFDs be interfaced to one another then they would each then support sharing of the DownVision and High CHIRP conical sonar processed via the Axiom RV MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)