Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) EV-300 control unit mounting
02-16-18, 03:38 PM (This post was last modified: 02-19-18 06:18 AM by Derek - Raymarine - Moderator.)
Post: #1
(DG) EV-300 control unit mounting
The cover of the EV-300 control unit states mounting arrows up to indicate the unit should be mounted to a vertical surface.
What would happen if the control unit was mounted horizontally, would this affect performance etc?
Find all posts by this user
Quote this message in a reply
02-19-18, 06:31 AM (This post was last modified: 02-19-18 06:35 AM by Derek - Raymarine - Moderator.)
Post: #2
RE: (DG) EV-300 control unit mounting
Hi Offshore Dave

Thank you for your enquiry

The EV sensor (the black disc part with the green LED) needs to be mounted in a horizontal plane for the internal sensors to operate correctly, see below
[Image: attachment.php?aid=1629]
The sensor itself can be mounted flat onto a horizontal surface without using the white bracket, or the sensor can be mounted onto a vertical surface using the bracket to ensure the sensor remains horizontal.

Regards


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us