Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Axiom Pro RVX with M265 LM
02-19-18, 12:05 AM (This post was last modified: 02-20-18 02:19 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] Axiom Pro RVX with M265 LM
Configuration: One Axiom Pro RVX connected to one M265 LM. When the display is set to view both low frequency and medium frequency CHIRP, are both L and M frequencies pinging at 1KW each or are they pinging at 500W each?
Find all posts by this user
Quote this message in a reply
02-20-18, 02:31 PM
Post: #2
RE: [CA] Axiom Pro RVX with M265 LM
Welcome to the Raymarine Forum karlista,

Q1. One Axiom Pro RVX connected to one M265 LM. When the display is set to view both low frequency and medium frequency CHIRP, are both L and M frequencies pinging at 1KW each or are they pinging at 500W each?
A1. Both L and M frequencies will ping at 1kW when in depths requiring 1kW power. When operating in Auto, the power output of the MFD's internal 1kW CHIRP sounder circuitry will vary based upon depth ... lower power at shallow depths, ramping up to highest power as depth increases. The MFD's internal 1kW CHIRP sounder circuitry will typically reach maximum power output within a few hundred feet of depth.
Visit this user's website Find all posts by this user
Quote this message in a reply
02-21-18, 12:46 AM (This post was last modified: 02-21-18 09:30 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA] Axiom Pro RVX with M265 LM
Outstanding and thanks for the response.
Find all posts by this user
Quote this message in a reply
02-21-18, 09:30 AM
Post: #4
RE: [CA] Axiom Pro RVX with M265 LM
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us