Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] Axiom 9 cannot fix to satellites after Factory Reset
02-23-18, 03:24 PM (This post was last modified: 02-26-18 06:00 AM by Derek - Raymarine - Moderator.)
Post: #1
[DG] Axiom 9 cannot fix to satellites after Factory Reset
Hi Chuck
Problems continues after Factory Reset today - have already sent two threads.
My Axiom 9 now takes about 30 minutes to fix to satellites even that it shows 30 GPS in the little orange dot and 10 Glonoss - see picture 1 and 2

So what I can conclude now after Factory Reset is:
1. Difficulties to Satellite Fix
2. No Autoroute dropdown menues see picture 3 and 4 - In demomode Autoroute dropdown menu works
3. No Shallow Water setting possible se picture 5

I have tried to solve these issues today by:
1) Once more Factory Reset
2) Upgrading my Navionics+ card see picture 6
3) Reloaded the LH 3.3.170 Software picture 7-8

I really regret making the Factory Reset - before that I "just" had some power on swip problems!

Axiom is bought 15.2.2018
Rg
Jorgen
Find all posts by this user
Quote this message in a reply
02-26-18, 06:07 AM
Post: #2
RE: [DG] Axiom 9 cannot fix to satellites after Factory Reset
Hi Jorgen,

If you have no GPS Fix, then AUTO ROUTING will not operate,

I see in a later post that you completely depowered the display, then when repowered the unit completed its restart and it all seems to operate correctly.

This has not been previously reported as a failure mode or bug so please can you monitor this and report back if it reoccurs.
regards
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us