Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] AXIOM PRO RVX connect to B744VL
02-27-18, 07:33 AM (This post was last modified: 02-27-18 09:20 AM by Chuck - Raymarine - Moderator.)
Post: #1
Thumbs Up [CA] AXIOM PRO RVX connect to B744VL
Hi Chuck,

If I use (A80496) adaptor Cable to attach an Airmar transducer (8 pin) to AXIOM Pro-RVX (11 pin) to connect B744v(A66091),is that available for use??
(Depth/speed/Temp)

Cheers,
Jimmy
Find all posts by this user
Quote this message in a reply
02-27-18, 09:30 AM
Post: #2
RE: [CA] AXIOM PRO RVX connect to B744VL
Welcome to the Raymarine Forum Jimmy,

B744V is the product name given to a family of transducers, each uniquely designed for use with a specific fishfinder or instrument manufacturer and further for specific fishfinder designs within their product lines. Axiom Pro RVX MFDs may be adapted for use with 50kHz/200kHz transducers which were designed to be directly mated to a CP370/CP300/DSM300/DSM30/DSM250's Transducer socket. Accordingly, please note that the Axiom Pro RVX MFD can only be adapted (part #A80496) for use with the A66091 variant of the B744V transducer.
Find all posts by this user
Quote this message in a reply
02-28-18, 09:56 AM
Post: #3
RE: [CA] AXIOM PRO RVX connect to B744VL
Hi Chuck,

Thank you very much.

Good Day.
Jimmy
Find all posts by this user
Quote this message in a reply
02-28-18, 11:21 AM
Post: #4
RE: [CA] AXIOM PRO RVX connect to B744VL
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)