Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Display example(s) of HD open array radar interfaced to E-classic MFDs
09-10-19, 10:18 AM
Post: #8
RE: [CA] Display example(s) of HD open array radar interfaced to E-classic MFDs
Lothar,

Raymarine MFDs running the latest LightHouse 3 software and have been interfaced to a heading source, a GPS input, and a Magnum radar will, in real time, orient the Magnum radar's image spokes overlaid within the Chart application or the Radar application. In contrast, when a Magnum radar is used with other Rayamrine MFDs (which in turn use software other than LightHouse 3), the Magnum radar's image spokes overlaid within the Chart application or the Radar application will be oriented once with each sweep of the radar.

Regarding the mounting templates for older open array pedestals, they indeed have not yet been posted with the manuals for Raymarine legacy radar products. However, the bolt pattern for the Magnum radar pedestals is identical to all of the radar pedestals produced by Raymarine going back as far as the hsb Pathfinder Series Radar Pedestals of the late 90's / early 2000's timeframe.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] Display example(s) of HD open array radar interfaced to E-classic MFDs - Chuck - Raymarine - Moderator - 09-10-19 10:18 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)